C&K systems LED Keypad Instrukcja Użytkownika Pobierz pdf (Strona 26)

Arm/Bypass

Automatic (Timed)

Arming

Interior armed _X_

Perimeter armed _X_

Exit allowed _X_

Requires user code ___

Automatically arms _X_

No entry allowed ___

Your system can automatically

arm itself at preset times of the

day.

At two minutes and again at

one minute before the Auto-

matic Arming sequence begins,

the siren sounds. Then, the exit

delay begins. You must leave

the building during the exit de-

lay, or an alarm sounds.

You can postpone the Auto-

matic Arming sequence by one

hour. When the siren sounds

two minutes before arming oc-

curs, press the

key,

then enter your user code.

You can change the days that

Automatic Arming occurs by

following the procedure to the

right. To stop Automatic Arm-

ing, turn off all of the Automatic

Arming days. To change the

times that arming occurs, con-

tact your installer. (See Note 1

on page 62.)

To Change Automatic

Arming Days:

1. Press and hold the

[walk test] key for 2 seconds

until you hear two beeps.

Enter the master user code.

2. Press the key six

times until you see the fol-

lowing:

1 2 3 4 5 6 7 8

3. Press the key. The

zone LEDs light to indicate

the days when Automatic

Arming occurs. The zone 1

LED represents Sunday, etc.

A lit LED means arming oc-

curs on that day.

4. Press the number of the

day(s) you wish to switch on

or off. To exit, press the

key.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

C&K systems LED Keypad Instrukcja Użytkownika Strona 26

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa C&K systems LED Keypad